Just in case you missed my What I Know post over at
Southern Lovely here it is! I have this little shelf unit in my entry and I've been wanting to give it a makeover to match and flow with the rest of the pieces in my home. Here's what I did to make it beautiful!
1. Clean with soap and warm water.
2. Primer is the key to no sanding! Apply an EVEN and generous coat of primer. I use and prefer KILZ primer. There are a couple things to think about when choosing a spray primer or primer by the gallon.
- If the piece has a lot of detail or rounded edges in it I would use the spray. It will be a little more expensive, but so worth it!
- If the piece has flat edges I would choose primer by the gallon and invest in a good roller.
Before you move to the next step please please please make sure the entire piece has an even and generous coat of primer.
3. Once the primer is completely dry apply paint. I prefer Krylon, Rustoleum or Valspar spray paint. You will want a good quality spray paint. In my opinion I think spray paint gives the piece a more finished look. It is quick and you don't have to worry about brush or roller marks. One day I hope to own a paint sprayer and then I will use paint by the gallon, but until then spray paint is my best friend!
When spray painting hold the can upright at all times possible and spray in even strokes from one side to the next. For this piece I started on the side at the top left corner; sprayed in one stroke to the right corner and moved back and forth. It will look streaky. Don't spray another coat on until the previous coat is dry. If you do it to soon you will get drip marks and have to sand them out. For each coat I also flip my furniture if possible. For example on this piece I sprayed the first coat with it standing up and the second coat with it on it's side. This will help to eliminate streaks.
Keep applying coats until desired color is reached. For this piece I used Krylon Ivory in a glossy finish and applied 4 coats. I didn't spray the inside and you'll see why below.
4. Next comes the glaze. I use Behr faux finishing glaze tinted black. There are two types of glazing that I'm aware of.
- Clean glazing - when the glaze is only in the indents, cracks or corners.
- Dirty glazing - when glaze is applied randomly allover.
Here is a photo of the side while I was glazing. The far right indent has no glaze, middle is how it looks right after I apply the glaze and the far left is what it looks like when the excess is wiped off.
A little glaze goes a long way. Use a foam brush and dip the tip in the glaze and dab into indent making sure to cover it completely with glaze. Using a damp cloth wrapped around your index finger wipe excess glaze off leaving glaze only in the indent. Repeat the steps if needed.
5. For this project I wanted a design on the inside. I've seen many different options such as wall paper and stencils, but I opted for a very inexpensive and less time consuming version and used wrapping paper.
- Measure and attach the back piece first. Add a 1/2 inch to the width of the measurement and wrap around onto the sides when gluing it in place. This will ensure that you don't have any gaps that will show through at the corners.
- Measure and cut the sides. I added 1/4 inch to the width so I could wrap it around on the front inside that will not be seen.
Here's how it turned out.
Much better don't you think? I love it! Enjoy!
